|
|
|
|
|
|
|
|
i-Leaktek 6600 Leak and Seal Strength Tester can be used for quantitative determination of seal strength, leakage, and burst pressure of flexible packages, aseptic packages and many others.
This leakage tester/seal strength tester conforms to various national standards and international standards:
ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2, GB/T 10440-2008, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T 10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002
i-Leaktek 6600 Leak and Seal Strength Tester can be used to measure the following materials:
Basic Applications |
---|
Test the ability to withstand pressurization stress of the completely sealed or three-sided sealed and one-sided open packages made of plastic films, aluminum films, paper-plastic or aluminum-plastic composite films |
Test seal performance of various pilfer-proof closures, e.g. closures used for packages of Coke, mineral water, beverage, edible oil, sauce (soy, vinegar and cooking wine), three-piece cans (beer and beverage), and paper cans (cylinder shape for potato chips ) |
Test seal performance of various aerosol valves, e.g. vales of pesticide, hair spray, auto spray paint and medical spray packages |
Including various flexible tubes used in daily chemical products and other industries, e.g. flexible tubes of toothpaste, face cream, cosmetics, pharmacies and food |
Test the ability to withstand pressurization stress of medical blister packs |
Extended Applications (Additional Accessories Required) |
Test the seal performance of the air bags or cushions, e.g. air bag restraint system, life saving device and air cushion for transportation |
Test the seal performance of the medical infusion bags or bottles |
Test the seal performance of the sterilized bags for medical purpose (LSSD-01P Fixtures for Open Package Unrestrained Test is required) |
Measure the heat seal strength, the quality of heat seal, the burst pressure and the seal-leakage characteristics of each heat seal edge of flexible packages that are made by various kinds of heat seal technologies. It is internally pressurized and enclosed within restraining plates, such as the packages and laminated packages of food and medicines. LSSD-01R Fixtures for Closed Package Restraining Test is required. |
Test the burst strength, seal performance and failure resistance of the one-sided open packages made by heat seal processing. LSSD-01P Fixture for Open Package Restraining Test is required |
Test the index between torque and airproof, capsule disengaging strength, stress force of materials and the data of airproof, press resistance and burst resistance for whole bottles. LSSD-01C Fixture for Plastic Pilfer-proof Closure Test is required |
For the quantitative testing of leak characteristics, compression resistance, capsule disengaging strength, cap body joint strength, seal-edge seal strength and butting strength of flexible tubes, for example medical polythene/ aluminum/ compound polythene tubes/ aluminum medical tubes/ cosmetic flexible tubes. LSSD-01F Fixture for Flexible Tube Test is required. |
For quantitative measurement of fluency, leak pressure, leak rate, seal performance and pressure resistance of aerosol valves. LSSD-01A Fixture for Aerosol Valve Seal Performance Test is required. |
Items | i-Leaktek 6600 Leak and Seal Strength Tester | |
---|---|---|
Test Specs | Test Range | 0~600 KPa; 0~87.0 psi 0~1.6 MPa; 0~232.1 psi (optional) |
Resolution | 0.1 KPa | |
Test Accuracy | 0.1% FS | |
Gas Injection Head | Φ10 mm (standard) Φ4 mm, Φ1.6 mm (optional) | |
Environment Monitoring Specs (Optional) | Voltage Monitoring Range | AC 0~250 V, with ±0.5% accuracy |
Current Monitoring Range | 0~15 A, with ±0.5% accuracy | |
Energy Analysis Accuracy | ±0.5% | |
Environmental Temperature Monitoring Range | -10 °C~55 °C, with ±0.1 °C accuracy | |
Environmental Humidity Monitoring Range | 0~100% RH, with ±2% RH accuracy | |
Other Specs | Gas Supply Pressure | 0.4~0.9 MPa (outside of supply scope) |
Port Size | Φ8 mm PU Tubing | |
Instrument Dimension | 300 mm (L) x 310 mm (W) x180 mm (H) | |
Dimension of Testing Platform | 305 mm (L) x 356 mm (W) x 325 mm (H) | |
Power Supply | 220VAC 50Hz / 120VAC 60Hz | |
Net Weight | 23 kg | |
Configurations | Standard | Mainframe (including Wireless Data Interface), Professional Software, LCD Monitor, Keyboard, Mouse, Test Frame |
Optional | Environment Monitoring Sensors (including voltage, current, temperature, and humidity sensors), LSSD-01R Fixture for Closed Package Restraining Test, LSSD-01P Fixture for Open Package Unrestrained Test, LSSD-01C Fixture for Plastic Pilfer-proof Closure Test, LSSD-01F Fixture for Flexible Tube Test, LSSD-01A Fixture for Aerosol Valve Seal Performance, Printer (compatible with PCL3) | |
Online Data Management System for Packaging Testing | Wireless Data Transfer Module, High Gain Antenna |
Note:
1. The gas supply port of instrument is φ8 mm PU Tubing;
2. Customers will need to provide gas supply.
We can help you select or customize the proper unit for your test requirements.
This leak and seal strength tester can be used with our advanced Online Data Management System for packaging testing, which comes with two versions to meet distinct needs of our clients:
Need help or have a question? For more information on how Labthink can help your company profit through testing, please Click the button.