New Products: C611M Box Compression Tester
XYD-15K Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks (for edible oil and mineral water), paper tanks, paper cases, IBC tanks and other packages.
Features
- The instrument is controlled by micro-computer with menu interface, PVC operation panel and the testing process is automatic
- 4 testing modes: deformation under defined load, load under defined deformation, maximum load and stack tests
- Dynamic digital-display of the test number, specimen deformation, real-time load and initial load
- Single-phase power and direct-current drive guarantee the adjustability, accuracy and stability of test speed
- Overload protection, maximum stroke protection and error alert for safe test operation
- Light-weight design, suitable for various floor loads
- Equipped with micro printer which is convenient for the printing of test data
Test Standards
This instrument conforms to various national and international standards:
ASTM D642, ASTM D4169,TAPPI T804, ISO 12048, JIS Z0212, GB/T 16491, GB/T 4857.4
Applications
| Basic Applications |
|---|
Test deformation under defined load of various corrugated cartons and beehive crates |
Test load under defined deformation of various corrugated cartons and beehive crates |
Test the maximum load of various corrugated cartons and beehive crates |
Stack test of various corrugated cartons and beehive crates |
| Extended Applications |
Compression test of plastic casks and mineral water bottles |
Technical Specifications
| Specifications | XYD-15K Box Compression Tester |
|---|---|
| Load Cell Capacity | 15 KN or 45 KN (Optional) |
| Accuracy | 1% FS |
| Force Resolution | 1 N |
| Deformation Resolution | 0.1 mm |
| Test Speed | 5 mm/min, 10 mm/min, 12.7 mm/min |
| Test Space | 1 m (L) x 1 m (W) x 1.3 m (H) |
| Power Supply | 220VAC 50Hz / 120VAC 60Hz |
| Instrument Dimension | 1.2 m (L) x 1.5 m (W) x 2.3 m (H) |
| Net Weight | 800 kg |
Note 1: The parameters in the table are measured by professional operator in Labthink laboratory according to relative requirements for laboratory standard conditions.
Note 2: The described product features, test standards and configurations should be in line with Technical Specifications.
