Bag packaging -- aluminum-plastic packaging, plastic composite packaging, aluminized packaging
C106H GasPermeability Test System is based on the differential pressure method,and is professionally applicable to the determination of gas transmission rate,solubility coefficient, diffusion coefficient and permeability coefficient ofplastic films, composite films, high barrier materials, sheets, and metal foilsat different temperatures.
C206H Oxygen Transmission Rate Test System is designed and manufactured based on the coulometricsensor method and conforms to ASTM D3985.
C306H WaterVapor Transmission Rate Test System is designed and manufactured based on infrared sensormethod and conforms to the requirements of ASTM F1249 and ISO 15106-2.
C203H Oxygen TransmissionRate Test System is based on Coulometric oxygen analysis sensor andequal pressure test method, and is conforming to ASTM D 3985 and otherstandards. It provides high-precision and high-efficiency oxygen permeabilitytests for high and medium gas barrier materials.
C303H Water Vapor Transmission Rate Test System is based on the testingprinciple of infrared water vapor sensor, it is designed and manufacturedaccording to ASTM F1249, ISO 15106-2 and other standards to provide highprecision and high efficiency water vapor transmission test for high and mediumgas barrier materials.
C680M Tearing Tester is suitable for testing tear resistance of film, sheet, soft PVC, PVDC,water-proof roll, woven material, polyolefin, polyester, paper, paperboard,textile and non-woven fabric, etc.
C650H Headspace Gas Analyzer is ofprofessional structure design and is with high-precision sensor, the O2 Contentin sealed bags, bottles, cans and other hollow packaging containers can beaccurately and conveniently determined. Meanwhile, with the selection of testaccessories, CO2 can also be tested.
C670M FallingDart Impact Tester is suitable for measuring the impact mass and energy of plastic film orsheet when 50% of the sample is damaged under the impact of free falling dartat a given height.
B2260 WVTR Test Dish Tightening Device is an auxiliary device to permeability testing instruments, for tightening the test dishes in water vapor transmission rate tests of films, sheets and similar materials used in food, medicine, medical devices, daily chemical, photovoltaic, electronic and many other industries.
C360 Water Vapor Transmission Rate Test System, is designed and manufactured based on the gravimetric determination method and conforms to the requirements of ASTM E96.
C390 Water Vapor Transmission Rate Test System, is designed and manufactured based on infrared sensor method and conforms to the requirements of ISO 15106-2 and ASTM F1249.
Water Vapor Transmission Rate Test System, is designed and manufactured based on the electrolytic sensor method and conforms to the requirements of ISO 15106-3.
C130H Gas Permeability Tester is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate, solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheets, and metal foils at different temperatures.
C230 Oxygen Transmission Rate Test System is designed and manufactured based on the coulometric sensor method (aka. equal pressure method) and conforms to ASTM D3985.
C830H Migration & Non-volatile-matter Content Tester, which can be widely used for determination of migration of various packaging materials for food and their products, non-volatile contents of packaging materials for pharmaceuticals, total solids, water and fat of food, water and insoluble substances of pharmaceuticals and food additives.
C640 Thickness Tester is a high precision mechanical contact method thickness tester, which can be used for thickness measurement of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, and solid insulation materials, etc.
C610H is professionally applicable to measurement of tensile, peeling, deformation, tearing, heat sealing, adhesive, physical force as well as other properties of soft package materials, adhesives, aluminum foils, diaphragms, back sheets, non-woven fabrics, rubber and paper, etc.
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
C630H Heat Seal Tester can be used to determine the optimal heat sealing parameters including dwell time, sealing pressure and sealing temperature for plastic films, flexible composite films, plastic coated paper and other heat-sealable films.
C632B Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic films, laminated films and other packaging materials. It is applicable in peel test, tensile at break test, and other tests for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
C612M Digital Torque Tester is the first generation of automatic torque tester with manipulator, which is one professional testing instrument that can be used to measure the application torque and removal torque of the caps of bottles, spout bags and flexible tube packages.
C660M Leak and Seal Strength Tester is professionally applicable to quantitative determination of seal strength, seal quality, burst pressure, seal integrity, compression resistance, torsion force and joint/disengaging force of various flexible packages, aseptic packages, plastic tamper-evident closures, flexible tubes, caps and other materials.
C660B Leak and Seal Strength Tester is professionally designed for the leakage tests of packages for food, drugs, medical instruments, household chemical products, cars, electronic components, stationeries and other industrial products.
C681M Flex Durability Tester is professionally applicable to the determination of flex durability of flexible films, composite films and coating films.
RT-01 is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument conforms to ASTM D5264 & TAPPI T830.